Back to the overview

Hot-dip galvanising

Traditional hot-dip galvanising provides permanent and lasting protection against rust for steel, making it a very good choice when it comes to optimal corrosion protection.

The molten zinc forms an inseparable bond with the steel to be protected in a 450°C molten bath. The solid, metallic zinc coating seals the entire workpiece completely and seamlessly. All surfaces in the cavities are also fully protected.

Due to the metallurgical reaction between zinc and steel (FeZn alloy), hot-dip galvanising provides long-lasting, effective protection against subsurface rust and, with its cathodic protection, is even capable of repairing minor damage.

The steel’s metallic appearance is retained, as is its surface structure. When fresh, the zinc layer is usually light in color; depending on the material used, it can be slightly shinier or duller, with the typical spangled pattern or almost without any pattern.

Over time, a patina forms as a result of zinc corrosion, becoming darker and duller in appearance. The patina is a weather-resistant protective layer of zinc oxide and zinc carbonate.

Depending on the thickness of the zinc coating, hot-dip galvanising can achieve varying degrees of protection. The batch galvanising process used at ELEO is characterized by the resulting zinc coatings having thicker zinc layers than those produced using strip galvanising or electroplated zinc coatings. This provides better corrosion protection, often lasting for decades, without requiring maintenance.

Procedural steps

At ELEO, hot-dip galvanising takes place exclusively in professional, ISO-certified hot-dip galvanising plants that operate strictly according to the relevant DIN standards.

This requires a rough surface pretreatment, and hollow profiles such as posts must be drilled. These drill holes must allow all fluids to drain completely.

After delivery to the hot-dip galvanising plant, parts containing grease and oil residues are first cleaned in a degreasing bath. Aqueous alkaline or acidic degreasing agents are typically used as degreasing agents. After an alkaline degreasing bath, the parts are briefly immersed in a water bath to prevent the degreasing agents from being carried over into the galvanised material.

This is followed by a pickling treatment to remove contaminants such as rust or scale from the steel surface. Pickling is usually carried out in diluted hydrochloric acid.

After pickling, the components are usually rinsed twice, treated in a flux bath, and dried.

The elements are then immersed in the molten zinc bath, which has a zinc content of at least 98.5% according to DIN EN ISO 1461. The component to be galvanised remains in the zinc bath until it reaches the zinc bath temperature.

After the steel elements are removed from the molten zinc bath, they must first cool down and then undergo refinishing according to standards. This refinishing process is also known as trimming or deburring; it involves removing zinc tips, for example.

Applications and Benefits

Hot-dip galvanising in bulk offers the most effective protection against rust compared to other galvanising processes, which is why ELEO deliberately uses this type of galvanising exclusively, which offers the following advantages:

  • Excellent cathodic corrosion protection, even in cavities and on edges, making it virtually maintenance-free
  • High mechanical strength
  • Good ecological balance, environmentally friendly process

Our topsellers

Open configurator

  • Choice of Finials Choice of Finishes Period Style Lucca Lucca fence panels in a straight design with a Ball Fleur-de-lis, powder-coated anthracite

    Lucca

    from £199.70 p/m
  • Choice of Finials Choice of Finishes Period Style Belluno Belluno fence panels, powder-coated anthracite

    Belluno

    from £168.20 p/m
  • Choice of Finials Choice of Finishes Modern Minimalist Ancona Ancona fence panels, straight design with Ball-top Rod, powder-coated anthracite

    Ancona

    from £139.20 p/m
  • Solid square bars Choice of Finishes Modern Minimalist Padua Padua fence panels, straight design, powder-coated anthracite

    Padua

    from £151.30 p/m
  • Choice of Handrails Choice of Finishes Bologna Bologna balcony railing, powder-coated anthracite

    Bologna

    from £248.10 p/m
  • Choice of Handrails Solid square bars Choice of Finishes Padua Padua balcony railing, powder-coated anthracite

    Padua

    from £199.70 p/m
  • Available in four shapes Solid square bars Choice of Finishes Perugia Perugia courtyard gate in a wavy shape, powder-coated anthracite

    Perugia

    from £707.90
  • Full coverage Full Privacy Screening Plain Panels Pesa Pesa privacy door - powder-coated anthracite

    Pesa

    from £629.20 / m²